Publish Time: 2023-07-13 Origin: Site
With the widespread use of industrial wireless remote controls, the remote control distance of joystick remote control has become a topic of concern. Form more information about the joystick remote control, please read the following words.
How to solve the interference problem of joystick remote control?
What are the structural components of the joystick remote control?
How do I keep my joystick remote control safe to use?
First, press and hold the joystick remote control before powering off, at this time the signal has been overwritten. Then go back to the power supply, and within three seconds, keep pressing and holding the transmit button of the remote control, because the signal has been overwritten so that the remote control has been in the transmit state, then the controller can only receive the signal.
Second, from the previous single button to code mode to the current double button to code mode, for example, the previous power on the code when press a key or a key, you can achieve the code, now then it is not possible, you have to press and hold two buttons at the same time, in order to code in. This makes it almost impossible to record signals from other devices.
The joystick remote control is divided into two parts: transmitter + receiver, the remote control communicates with the locomotive through CAN bus communication, mainly has 32 switch outputs, controls the locomotive forward and backward through the one-way rocker, controls the locomotive's high and low beam switch through the self-resetting switch, the warning light switch, and controls the hook switch, the remote control with two-way feedback display, which can display information such as speed and locomotive fault codes.
The basic parameters of the joystick remote control are
Remote control distance: 250 m (open linear distance).
Protection class: IP65 (transmitter side).
Power supply: transmitter: rechargeable lithium battery, one main and one backup, receiver: AC/DC 12~24V
1. When designing and installing joystick remote control to achieve multi-point control of equipment, the receiver should have an operational interlock. Ensure that only 1 transmitter's commands are executed at the same time.
2. Address code: Address code is unique, when the transmitter and receiver coding and decoding settings are the same, the remote control can work properly. The main remote control can check the wrong code of the time division system cycle digital transmission method. The so-called digital transmission method is to transmit the information of the manipulated switches in serial binary code according to the time distribution. This method is suitable for transmitting multiple operating instructions and is able to check for wrong codes, prevent mis-operation and improve safety.
If you want to get more information about the joystick remote control, please connect WELPING Co., Ltd., they will be very pleased to help you.