What are the features of wireless crane remote control

The wireless crane remote control is transmitted via radio waves rather than infra-red, so a receiver is required for the connection to the control cabinet wiring.

What is the difference between the two speeds and the single speed of the wireless crane remote control?

To put it simply, the two-speed remote control has two more buttons than the single-speed one. As for the function, it means that the double speed can control one more motor. The single and double speed of the crane refers to: single speed, there is only one lifting system in the lifting assembly, the speed is 8m/min; double speed, there are two lifting systems in the lifting assembly, the speed is 8/0.8m/min (also called fast and slow lifting system).

How to judge the quality of wireless crane remote control?

There is a working status indicator on the control board of the wireless crane remote control receiver, if the remote control is working under normal power supply, if the indicator light is not on, then basically you can tell that the remote control is faulty.

But the best way is to measure whether the relay output contact on the remote control is on when the wireless crane remote control receiver is powered up and working.

The main thing is of course the material of the relevant steel plates and profiles. The rigidity of the crane can be determined by looking at the deflection of the main beam during the static load test. Others can only look at the appearance: such as the quality of the weld seam, to see if there is a lack of welding leakage weld porosity slag bite edge false welding and so on, the importance of which should not be ignored, and then look at the thickness of the paint film, do not underestimate this, the thickness of the paint film is easy to corrode. Of course there are many more, a moment can not say so much.

What are the features of wireless crane remote control?

1. wireless crane remote control includes proportional trigger control

2. wireless crane remote control is easy to install

3. wireless crane remote control comes with a sealed receiver in a rugged cast aluminum housing.

4. wireless crane remote control has a rugged transmitter designed for the harshest environments

5. Twist to release emergency stop for safe shutdown

6. If the receiver is turned off and the transmitter remains on, the wireless crane remote control automatically shuts down to save battery power.

7. Rechargeable long-life lithium-ion battery with charging and full indication. Built-in charging circuitry stops charging when the transmitter is fully charged

8. 900 MHz frequency hopping spread spectrum for interference-free operation.

9. wireless crane remote control is all solid state electronics

Nanjing Xiading electronic technology Co.,Ltd pursue the development concept of safety, reliability and efficiency, and continue to innovate and introduce more new products to meet more customer requirements. It is believed that in the future, LCC brand remote controls will be favored by more consumers.