Views: 0 Author: Site Editor Publish Time: 2023-07-04 Origin: Site
The joystick remote control is designed for complex applications that require control of a large number of functions while focusing on improving the ease of use, efficiency and productivity of industrial machine operations.
The joystick remote control's rugged and practical console unit is suitable for indoor or outdoor applications and allows multiple operations to be performed simultaneously - its safety belt system allows both hands to be used for different controls. Its two-way communication and OLED display allows constant feedback of important information as well as operating status, radio and battery power, so users can always be sure of what is happening.
Our joystick remote control offers a wide range of customization options to meet the needs of the end user. Everything from labels, buttons, switching joysticks, paddles, displays, communications and software can be customized to the end application.
The joystick remote control is well equipped to be used as a master controller for custom control systems or to connect to existing complex PLC-based applications using radio and/or communication buses.
When paired with an FSL receiver, the joystick remote control can meet the needs of customers through
Full face labeling using text and graphics capabilities
Complete console button and control customization
Company logo
Standard receiver units
SRS special receiver solutions
1、Emergency stop function: In case of misoperation or abnormal action, use the joystick remote control emergency stop switch to cut off the control power on the equipment, while the transmitter stops sending operation commands, the equipment stops action. The emergency stop switch cannot be automatically reset, and the specified start-up procedure must be carried out before re-operation.
2、Zero protection: zero protection before operation - all operating handles are in the zero position before operation before sending operating commands.
3、Power failure protection: In the event of an accidental power failure, the joystick remote control receiver should stop working immediately. After power supply is restored, the remote control shall be connected to the main power supply of the equipment according to normal operating procedures. Transmitter in the power supply voltage is too low. Should be issued through the self-test function to stop working instructions.
4、Safety interlocking: joystick remote control in lifting items running and other actions to change direction, cut off the control circuit of the opposite direction of action. When the ordinary manual operation is changed to remote control, the original driver's room operation mode should be retained.
5, the design and installation of remote control, joystick remote control to achieve multi-point control, the receiver should be set up to operate the interlock. Ensure that only 1 transmitter's command is executed at the same time.
Nanjing Xiading electronic technology Co.,Ltd has various joystick remote controls and they are all more effective, reliable, and consistent.
